SRAM TECH via YouTube
Go to Source
This video will guide you through the bleed process for SRAM MTB Mineral Oil Hydraulic Disc Brakes.
You will need the following tools and supplies:
Hex Wrenches: 2.5 mm, 3 mm, 5 mm
Bit Sockets: 2.5 mm, 5 mm
TORX® Wrenches: T10
TORX® Bit Sockets: T10
Torque Wrench
Needle Nose Pliers
Safety Glasses
Nitrile Gloves
SRAM Mineral Oil Brake Bleed Kit
Maxima Mineral Oil
If you have questions about the installation or service of these or any SRAM components, please consult your local qualified bicycle mechanic.
00:00 – SRAM MTB Mineral Oil Brake Bleed
00:26 – Brake Pad Removal
01:15 – Syringe Preparation
02:08 – Lever Preparation
02:21 – Bleed Procedure