Video by Dirt-E-Bikes via YouTube
Source
Thats Part 3 of the series where i show modifications and upgrades on my Elegoo Neptune 4 Pro. This time they need some additional Parts, like screws, washers, T-Nuts etc. Most of the parts should also fit the Neptune 4 Plus and 4 Max, as well as for the Neptune 3 series printer.
This videos sponsor is PCBWay.com and you can get 5% off your first order if you want.
They are professionals in the manufacture of a wide variety of parts. So you can make your own parts without having to own the necessary machine. you can find them on
https://pcbway.com/g/cKBcmd By useing this link you will also get 5% off your first order.
The Upgrades video Part 1 is here:
The Upgrades video Part 2 is here:
Mods and Upgrades for the Elegoo Neptune (3) / 4 / Pro printer i found on thingyverse and printables.com
Here are all the Links to the Parts i used in this video:
https://www.thingiverse.com/thing:5882179/files – Spoolholder with bearings by afruzu
https://www.thingiverse.com/thing:6213046 – Z axis belt tension by entasdisk
Additional parts required for the modifications shown:
Link pom wheels:
https://a.aliexpress.com/_m0g0NMk
link bearings for belt tensioner:
https://a.aliexpress.com/_mq0LmFQ
2020 M4 T-slot nuts:
https://a.aliexpress.com/_mMUWmF2
M4 screws:
i used Flat head screws with a length of 10mm
M4 washers:
2 per tensioner
M5 screws nuts:
from your local hardware store, you need 1 to 2 screws (30mm) for 1 or 2 Tensioners, and 2 or 4 nuts…
and no, thats not my voice, i would have a strong accent and you would not understand half of it, so i use a Voiceover made with voicemaker.in