SRAM TECH via YouTube
Go to Source
This video will guide you through the hose shortening procedure for SRAM eTap AXS HRD systems.
You will need the following tools and supplies:
8 mm Flare Nut Wrench
10 mm Open End Wrench
8 mm Flare Nut Crowfoot Socket
3 mm Hex Wrench
SRAM Hydraulic Hose Cutter
T8 TORX Wrenches
DOT Compatible Grease
SRAM eTap AXS HRD Brake Bleed Procedure – https://youtu.be/1C-IJKGlU-U
For more information visit www.sram.com/service
If you have questions about the installation or service of these or any SRAM components, please consult your local qualified bicycle mechanic.